

Strict domestic value addition (DVA) requirements under some of the government's production-linked incentive (PLI) schemes have slowed the manufacturing expansion they were designed to accelerate, according to an impact assessment released by NITI Aayog.
The report, prepared with IIM Ahmedabad as NITI Aayog's knowledge partner, finds that localisation thresholds under the advanced chemistry cell (ACC) battery, IT hardware, and automobile schemes were set higher than India's domestic supplier base could support. Schemes that adopted graded incentives linked to local content, or allowed localisation to progress alongside production scale, have performed better.
Under the ₹18,100-crore ACC battery PLI scheme, beneficiaries must achieve a minimum DVA of 25% by the end of the second year and 60% by the fifth year. However, the report says these requirements are misaligned with India's current industrial base, delaying capacity creation.
Against a target of 50 GWh, only 1.4 GWh of capacity has been created so far. Commercial production has yet to begin, and no incentives have been disbursed.
The domestic ecosystem for key inputs such as cathodes, anodes, and minerals, including lithium and cobalt, remains underdeveloped, making localisation difficult. The report identifies stringent DVA norms, tight timelines, and a short gestation period as key reasons for the scheme's underperformance.
“High local content requirement is a real challenge," said an official from an industry body on the condition of anonymity. "That is why they had to reduce the local content percentage from its earlier requirement." ACC battery manufacturers are now seeking a dedicated PLI scheme for ACC components under the Ministry of Heavy Industries.
The first PLI scheme for IT hardware fell short of its intended outcomes, partly because of inadequate incentives, ranging from 1% to 4% and averaging around 2%, and stringent DVA targets. Localisation requirements were imposed when the domestic ecosystem for bare printed circuit boards (PCBs), memory modules, and display panels was still at a nascent stage, making compliance difficult, the report says.
In 2023, the government replaced it with IT Hardware 2.0, with an outlay of ₹17,000 crore covering laptops, tablets, all-in-one PCs, servers, and ultra-small form factor devices. The revised scheme offers an average incentive of around 5%, along with additional incentives linked to the localisation of selected components. As of March 2026, it had attracted cumulative investments of ₹908 crore, generated production worth ₹21,853 crore, and created 4,859 jobs.
The ₹25,938 crore automobile and auto components scheme, meanwhile, requires companies to achieve 50% DVA to qualify for incentives. Vehicle and component manufacturers must calculate domestic value addition across their supply chains and submit the details to testing agencies.
The report says the stringent norms make compliance difficult because the domestic ecosystem for electric vehicle components and advanced automotive technologies is still evolving. High investment and turnover thresholds also favour larger manufacturers.
The electronics manufacturing scheme did not make value addition a mandatory criterion, allowing mobile phone assembly to expand rapidly. Production increased nearly 30-fold, from around ₹18,000 crore in 2014-15 to ₹5.45 lakh crore in 2024-25.
However, the expansion was driven largely by final assembly, with key components such as displays, batteries, and printed circuit board assemblies (PCBAs) continuing to be imported, the report notes.
A new ₹62,500 crore Mobile Phone Manufacturing Scheme, approved in July 2026 and scheduled to run through FY31, places greater emphasis on domestic sourcing, design, and research and development.
The telecom scheme, meanwhile, has no DVA requirement, allowing companies to import up to 100% of their components and still qualify for incentives.
According to NITI Aayog, schemes with graded incentives linked to localisation have delivered better results. Under the ₹24,000 crore solar photovoltaic (PV) module scheme, incentives increase with the level of domestic value addition. India's solar module manufacturing capacity has expanded from around 8 GW to nearly 116 GW, of which 24 GW is directly attributable to the PLI scheme.
The most significant localisation gains have been recorded in the white goods sector. Domestic value addition in air-conditioners and LED lights rose from 20% in FY20, before the PLI scheme, to 55% in FY25. It is projected to reach 75%-80% by FY28. Compressor manufacturing capacity has expanded tenfold to 10 million units. Cross-flow fans, which were entirely imported in 2021, are now 80% localised, while localisation of PCBAs has reached 90%.